Excavator Attachments in Maine - attempting to buy OEM or aftermarket Loader Accessories that can be provided without delay. Our highly trained Maine group of parts experts are standing by to help you choose the parts you require.
The telehandler or telescopic handler is a commonly used machine in agricultural and industrial applications. This particular machine is the same in appearance to a forklift and even works in a similar manner, although telehandlers are much more like a crane than lift truck. It has a telescopic boom which could lengthen forward and upward from the motor vehicle. The boom has the capability to fit one of various attachments including pallet forks, a bucket, a lift table or muck grab.
Pallet forks are the most common attachment designed for the telehandler. This particular equipment is most often utilized for transporting loads to and from places that a typical lift truck would find inaccessible. Telehandlers are specially helpful for placing loads on rooftops for example, or for removing palletized cargo from with a trailer. Many of the jobs that a telehandler could carry out will otherwise need a crane and this machine could be pricey, impractical and not always time efficient.
Since the boom raises or extends while bearing a load, it likewise acts as a lever. Even with the counterweights in the back, this causes the equipment to become ever more unstable; therefore, the advantage of the telehandler is really its greatest limitation. As the working radius increases, the lifting capacity decreases. The working radius is defined as the distance between the front of the wheels and the center of the load.
The telehandler with a 5000 lb capacity for example, with a retractable boom could safely lift as little as 400 lb at a fully extended boom at a low boom angle. Equivalent machines with a lift capacity of 5000 lbs and a retractable boom that could support as much as 10,000 lb with the boom raises to about 70 degrees. The operator has a load chart to help determine whether a specific lifting task can be accomplished in an efficient and safe manner. This chart takes into account the height, the boom angle and the weight.
Numerous telehandlers come equipped along with a computer which uses sensors in order to monitor the vehicle. These sensors would warn the operator and some are capable of cutting off further control input if the limits of the vehicle are exceeded. Several telehandler models are also equipped with front outriggers that are known as mobile cranes. These greatly extend the lifting capability of the machinery while it is stationary.
These Gradall machinery are capable of backing in crowded landing locations as well as moving down narrow aisles with better accuracy and speed. These models could also square-up lumber. The ergonomically designed and spacious machinery could offer a clear view of the job site. Telehandlers manufactured by Gradall are outfitted with various kinds of attachments to be able to accomplish a huge range of jobs. There is practically nothing a Gradall Telehandler cannot do, in order to achieve the high performance level you require to get the task finished.
JLG Telehandlers
Popular for their innovation, power and extreme versatility, JLG Telehandlers are key parts in JLG's family line of all-wheel-steer telehandlers. Their 1 compact model, along with their 5 full-sized models enable you and your company to tackle any jobsite challenge with efficiency and ease. These machines have the capabilities of a high-boom pivot, better overall visibility and a centered cab design.
Each and every JLG telehandler could be outfitted with numerous attachments. More versatility, strength and capacity are offered with JLG telehandlers. These equipment make a great addition to any fleet. A lot of smaller companies prefer to lease different brands and units before committing to buy something so expensive. This is an excellent option to experiment with the telescopic handlers available on the market and find the exact unit to meet your needs.
