Caterpillar Bulldozer Ripper Cylinder in Maine - With one of the biggest choices in the industry, you can be sure to locate the parts you will need to get you back to work very fast. We maintain easy access to an abundance of suppliers all around the world and can certainly source your personal new and used equipment needs.
Inspect a Forklift
OSHA and HRSDC report that more than 10,000 workplace injuries related to fork lifts take place every year. Driver error is the cause of many of these accidents. Lack of appropriate equipment inspection and maintenance results in numerous others. Maintenance and operation of a forklift is not just the cause of personal injuries, but also of property damage. Forklifts can damage building structures, overhead pipes and sprinklers, and other machines when incorrectly used. The following daily inspections must be performed in order to lessen the possibility of forklift accidents.
Turn the engine off before checking various fluid levels: fuel, engine oil, coolant, brake fluid and hydraulic oil. The tires must be inspected for indications of wear and tear. Check the air pressure in the tires. Check the forks' condition. The load backrest should be attached securely. Do a visual check of the top-clip retaining pin and heel. Next carry out an inspection of the mast chains, hydraulic hoses, stops and cables. Ensure that the overhead and finger guards are firmly attached.
LP forklifts have propane tanks that have to be inspected for indications of rust, corrosion or damage. Test the battery's charge and electrolyte levels. All belts should be inspected for wear. Check to make certain the owner's handbook is stored on-board the forklift inside a storage compartment. Test the seat belt to make sure the latches are secure. Test the hood latch to make certain that it is working as it should.
Start the forklift and listen to the engine noise to make sure there are no unusual sounds. If there are, investigate immediately. Check the steering controls and the accelerator. The service brake and the parking break should be properly functioning.
The drive control and tilt control must be checked to ensure proper functioning in both reverse and forward. Check the functioning of the lowering control and hoist, and the attachment control. Check the lights and horn. Then check the defroster, wipers and heater to make sure they are functioning well. Check every gauge to find out that it is reading within functional limits.
How to Replace Forklift Tires
Forklift maintenance includes regularly checking the tires. This also includes replacing worn or damaged tires. Different kinds of forklifts are intended to be utilized with specific types of tires: pneumatic, polyurethane or solid. Tire types differ depending on factors like for example duration and frequency of use, the weight of the load and ground surfaces. In order to change a forklift tire you would require the following tools: replacement tires, forklift jack and tire press. Replacing your forklift tires periodically is necessary to help prolong the equipment's lifespan.
Instructions
1 Thoroughly check the tires for signs of wear and damage. Make certain that the kind of tire on the forklift is the right type. If the wear on the tire exceeds 40%, the tire needs to be replaced.
2 Purchase replacement tires.
3 After you have positioned the jack underneath the tire, slowly lift the forklift high enough that would enable you to easily remove the tires.
4 Take out the old tire by using the tire press to separate the tire from the rim. Replace the tire with the new one and tightly secure. Lower the forklift, then move the jack to the next tire and do the same thing with the other damaged tire.
5 A damaged tire can be repaired on site by a local repair company. If this is your first call, the repair company may provide an estimate fro free. If the tires are really large, you will require a stationary tire press. In that case, you must remove the tire and bring it to a repair shop.
